连续变量量子纠缠增强实验的改进

通过在泵浦光和注入光路中加入高精细度模清洁器及提高实验系统锁定的精度,我们对连续变量量子增强的实验系统加以了改进,初始的EPR纠缠光场的正交振幅及正交位相分量的关联度分别从(2.4±0.2)dB,(2.4±0.2)dB提高至(4.0±0.2)dB,(3.9±0.2)dB,而输出纠缠态光场的关联度分别由原来的(3.0±0.2)dB,(3.0±0.2)dB提高至(5.6±0.2dB),(5.5±0.2)dB。与此前的实验系统相比,纠缠增强的效率及结果均有一定提高。     

基于相空间重构技术的金融系统混沌识别

借助工程技术领域内识别非线性系统混沌现象的相空间重构技术研究了金融混沌的识别问题.以我国金融系统历经本轮全球金融危机这个金融史上影响最为严重的金融混沌为研究对象;研究发现:在全球金融危机的冲击下,我国金融系统在运行过程中发生了确定性的失稳,出现了金融混沌现象.从而为进一步防范与控制金融混沌奠定基础.     

水资源短缺风险因子的筛选模型

水资源短缺评价首先需要确定指标体系,投影寻踪模型与灰色关联度法相结合,可以有效地筛选出水资源短缺风险因子,为进一步进行风险评价奠定了基础,同时也为制定风险的防范措施和对策提供了理论依据.综合应用这两种模型,对北京市2001～2009年的水资源短缺风险进行研究,结果表明:降水量、日照时数、雨日数、单位GDP污水排放量、人均GDP、工业总产值占有率、污水处理率和水循环使用率这8个指标是北京市水资源短缺的主要风险因子.     

调查问卷中含缺失数据的等级变量的补缺方法

讨论了调查问卷中等级变量缺失数据的补缺问题.基于多元统计学理论,并结合总体趋势和个体偏差,提出一种新的补缺方法,方法使得补缺值更加准确、真实,并且将此方法扩展到变量等级数不相等的调查问卷之中.     

DIGITAL IMAGE CORRELATION STUDIES FOR FATIGUE MICRO-CRACK INITIATION AND PROPAGATION OF NI BASED SUPERALLOY

An experimental investigation on the mechanical mechanisms of fatigue micro-crack initiation and propagation of a nickel-based superalloy is presented. By coupling digital image correlation method and scanning electron microscope, the fatigue residual strain distribution at the grain scale has been obtained. The results showed that there is a trend of accumulation for the residual strain. Micro-cracks are more likely to initiate in or near the areas with particularly large residual strain, and propagate along the large-strain paths.     

A note on the Sarmanov bivariate distributions

We investigate the maximum correlation for Sarmanov bivariate distributions with fixed marginals and strengthen the existing results in the literature. The improvement in the maximum correlation is significant. A characterization of the Sarmanov distribution via chi-square divergence is also given. This extends Nelsen [13] result about the Farlie-Gumbel-Morgenstern (FGM) distribution.     

一种新型风险型多指标决策方法研究

传统的风险型多指标决策模型没有考虑决策者对风险的态度,而决策者对风险的态度会影响决策的结果,针对这一问题文章在累积前景理论与灰色关联方法的基础上,提出一种考虑决策者风险偏好的风险型多指标决策的方法.该方法首先利用极差化法对风险决策矩阵进行规范化处理,并在此基础上构造出最优与最劣方案;然后利用累积前景理论与灰色关联方法构建前景值函数,并给出利用灰色关联思想确定指标权重的方法与步骤;最终求出各个方案的综合前景值并进行排序选优.通过某电信运营商对管道资源建设方案选择的实例分析说明了方法的可行性与有效性.     

Pseudotargeted screening and determination of constituents in Qishen granule based on compound biosynthetic correlation using UHPLC coupled with high‐resolution MS

Detection and determination of many known/unknown compounds in traditional Chinese medicines have always been challenging. To comprehensively identify compounds in Qishen granule, which is a widely prescribed herbal formula for treating chronic heart failure, a pseudotargeted screening method was proposed based on compound biosynthetic correlation using ultra high‐performance liquid chromatography coupled with high‐resolution mass spectrometry. Firstly, all possible compounds of Qishen granule were classified into nine types according to their core skeletons, and potential analogue molecular formulas were predicted according to core compound‐related biosynthetic correlations, such as methylation, hydroxylation, and glucosidation. Secondly, nine pseudocompound databases consisting of core compounds, deduced biosynthetic correlations, and predicted analogue molecular formulas were established. Then, compounds of interest were directly located by pseudotargeted screening of high resolution mass spectrometry data and further verified by target tandem mass spectrometry. As a result, 213 constituents were identified and 21 of them were determined as potential new compounds. This demonstrated that pseudotargeted screening based on compound biosynthetic correlations significantly facilitated the processing of extremely large information data and improved the efficiency of compound identification. This research provided essential data for exploration of effective substances in Qishen granule and enriched the methodology for comprehensive characterization of constituents in complex traditional Chinese medicines.     

Degradation kinetics of fluvoxamine in buffer solutions: In silico ADMET profiling and identification of degradation products by LC-MS/ESI

The kinetics of hydrolysis of fluvoxamine maleate (FLV) has been investigated over the pH range 1.0–12.0 at 40, 60 and 80 °C. FLV degradation follows pseudo-first-order kinetics which is consistent with the kinetics of drugs that are not readily dissolved in aqueous medium. The hydrolytic degradation rate constant (k_obs) range from 0.92 (pH 6.0) to 13.8 × 10⁻⁴ min⁻¹ (pH 1.0). The k_obs represents the sum of six different degradation rate constants; the k_H has been found to be higher than k_OH. The FLV exhibits a typical rate- pH profile with a flat bottom over the pH range 3.0–6.0 which indicates its maximum stability at pH 6.0. Ten FLV degradants have been predicted by Zeneth software and among them four degradation products (D1, D2, D3 and D4) have been identified in degraded samples. The in-silico pharmacokinetics and toxicity of degradation products have been determined using Swiss ADME and admetSAR software. The toxicity profile reveals that D2 is both AMES toxic and carcinogenic while the rest of the products are non-AMES toxic and non-carcinogenic. All of the degradation products are high in causing fish toxicity thus their presence in pharmaceutical waste is alarming for environmental safety.     

Processing discontinuous displacement fields by a spatio-temporal derivative technique

In this paper, a digital image correlation (DIC) method coupling cross-correlation with spatio-temporal differential techniques was proposed for assessing discontinuous displacement fields. The accuracy and robustness of the algorithm was assessed on a set of numerical tests by processing computer generated speckled-pattern images. Fracture mechanical tests in mode I were considered, in which both in-plane and out-of-plane rigid-body movements were taken into account. The ability for recovering the analytical asymptotic displacement field in mode I was analysed, and stress intensity factor, crack opening displacement and crack tip location were used as quantitative parameters for validation purposes. Throughout these tests, the results obtained with the proposed method were systematically compared to the ones from Aramis DIC-2D commercial code. Globally, the results computed from both methods are in good agreement with reference values. However, due to the high spatial resolution (point-wise characteristic), a better matching of the displacements in the neighbour of discontinuities could be obtained by the proposed method.